1.5 Ton 13.4 SEER2 Trane Air Conditioner Split System – R454B

OVERVIEW

The RunTru by Trane A5AC3018A1 is a standard AC-only condenser. Designed with comfort in mind and an inexpensive but higher-than-standard efficiency option for nearly any application, this condenser is considered a good all-around option for almost any application.

QUICK FACTS

• 1.5 ton, 13.4 SEER2 AC-only condenser
• Proudly Made in the USA: High-quality HVAC equipment crafted with precision and reliability
• Can cool up to a small house in average conditions
• Single stage compressor

1.5 Tons

The RunTru by Trane A5AC3018A1 air conditioner condenser has an output of 1.5 tons, generally enough to cool up to a small house in ideal climates. In many system configurations, the tonnage of the unit’s paired coil or air handler will be larger in tonnage than this condenser, which maintains the efficiency of the unit. Please note that this condenser cannot function or provide any sort of heating on its own, and it needs an indoor coil or air handler to work. If you have any questions, please contact us.

13.4 SEER2

The RunTru by Trane A5AC3018A1 air conditioner condenser is rated at 13.4 SEER2, making it between 5-7% more efficient than former 13 SEER1 units, saving you money in electric bills over the entire lifetime of your unit.

This unit (and all 13.4 SEER2 units) cannot be shipped or installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia. For more information about state efficiency requirements, please click here.

Warranty

RunTru by Trane offers a 10 year compressor, outdoor coil, and parts warranty on this condenser. For these warranties to be upheld, the unit must be installed following your state and local codes, a new and certified evaporator coil must be installed at the same time, and the entire system must be registered online through the manufacturer.

Durability

The cabinet of RunTru by Trane units are extremely durable. On the A5AC3018A1, there are reinforced corner posts and the internals of the unit are protected by an additional inlet grille, all to provide enhanced protection to the unit.

Disclaimer: This condenser contains R454B refrigerant, which is classified as an A2L refrigerant. To comply with safety standards, this unit must be paired with an R454B air handler or evaporator coil equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-557-9206 if you have any questions.

OVERVIEW

With its efficient 4-speed direct drive blower motor and factory-installed TXV kit, the RunTru by Trane A5AHC002A1B3 is a convenient and efficient air handler to provide comfort to your home. If you want superior quality and enhanced comfort, look no further than this model.

QUICK FACTS

• Can be used with 1.5 to 2 ton RunTru by Trane condensers
• R454B
• Proudly Made in the USA: High-quality HVAC equipment crafted with precision and reliability
• 4-Speed direct drive blower motor
• Multi-positional – can be installed in the upflow, downflow, and horizontal configurations
• Factory-installed TXV kit for enhanced energy optimization
• Compatible with both AC-only and heat pump condensers
• Sturdy, fully insulated cabinet

1.5 – 2 Tons

The Runtru by Trane A5AHC002A1B3 air handler is rated for an output of 1.5 – 2 tons. In many cases, this air handler will be larger in tonnage than the condenser it is paired with to maintain the unit’s overall efficiency. Please note that for this unit to provide cooling, an outdoor condenser is required for it to function. The unit can support electric heating as a straight electric furnace or as a backup for a heat pump, offered at an additional cost to be field installed.

Warranty

RunTru by Trane offers a 10 year indoor coil and parts warranty on this unit. For these warranties to be upheld, the unit must be installed following your state and local codes and the entire system must be registered online through the manufacturer. After your purchase, a representative will reach out to you to retrieve installation information so we can register the product for you.

Installation and Durability

To make a more versatile unit, RunTru by Trane designed the A5AHC002A1B3 to easily be installed in an upflow, downflow, or horizontal position. A TXV kit is already installed on the unit so your installer does not have to install one, decreasing installation costs. For durability, the A5AHC002A1B3 air handler is designed with an extremely strong, one-piece outer casing to protect the unit, and the coil is designed with corrosion-resistant aluminum.

Intelligent Comfort

The A5AHC002A1B3 air handler has an efficient 4-speed direct drive blower motor, providing stable temperatures in your home and making you more comfortable. The control board will automatically communicate with your thermostat to adjust the output of the blower to suit your needs.